Massey Ferguson 6400 - Issue 4.a
2B11.14
Perkins/GTA2520 engine separation
Operations on the right-hand side of the
tractor
35. Take off the front right-hand mudguard.
36. Disconnect the flexible sleeve (1) (Fig. 15) fitted to
the suction port.
If necessary, remove the vertical exhaust
assembly (including support) (Fig. 15).
37. Mark then disconnect:
- the hose on the steering ram or on the spool
valve (Orbitrol), depending on the tractor type
- the lubricating hoses (running to and from the
cooler) (Fig. 16)
Operations on the left-hand side of the
tractor
38. Take off the front left-hand mudguard.
39. Mark then disconnect:
- the hose on the steering ram or on the spool
valve (Orbitrol), depending on the tractor type
- the fuel feed and return hoses on the engine.
Immediately block the ports.
40. Disconnect the cables connected to the starter
positive terminal (Fig. 17).
Fig. 15
Fig. 16
Fig. 17