Massey Ferguson 6400 - Issue 4.a
2B11.8
Perkins/GTA2520 engine separation
Disassembly
22. Remove the screws and nuts attaching the engine
to the gearbox (Fig. 9). Mark their lengths and
positionings.
23. With the help of an operator, separate the
assemblies (Fig. 8).
N
OTE: When disassembling, check that all connections
(hoses, pipes and harnesses) are disconnected.
Dimensions of the screws, studs and nuts
Screws
- M16 x 60 mm
- M16 x 115 mm
- M16 x 185 mm
- M22 x 160 mm
Studs
- M22 x 160 mm
Nuts
-M22
Fig. 8
To Next Page
Loading...