MASSEY FERGUSON 6480 - Page 140

Massey Ferguson 6400 - Issue 4.a
2B11.16
Perkins/GTA2520 engine separation
Operations on the engine
42. Mark and disconnect the heating hoses on the
engine block and water pump.
Block the ports immediately using suitable plugs.
43. Disconnect the negative cables on the block at the
rear left-hand side of the engine (Fig. 19).
44. If necessary, disconnect the connector (1) of the
main wiring harness (Perkins EEM engine)
(Fig. 19).
45. Detach the air conditioning compressor,
condenser and filter from their respective supports
(if fitted).
Place the assembly beside the tractor without
disconnecting the pipes and hoses (see
chapter 12).
N
OTE: Carry out this action carefully.
Fig. 19
¤
H