Massey Ferguson 6400 - Issue 4.a
2B21.5
Splitting the Sisu engine/GTA1030
Servicing on the left-hand side of the
tractor
13. Remove the front mudguard.
14. Depending on the case:
- either move the fuel tank apart;
- or, if necessary, remove the fuel tank in the
following manner:
- previously drain it partially of its fuel,
- mark and disconnect its fuel gauge harness
and vent hose,
- Remove the tank.
15. Remove the side engine reinforcement.
16. Mark then disconnect:
- The lubrication pipes/hoses (1) located on the
cab front firewall (Fig. 3). These pipes/hoses
allow for oil flowing between the cooler and the
rear axle right-hand hydraulic cover;
- the rigid pipes (1) (Fig. 4) (pressure, return and
LS) to the suspended front axle (if fitted);
- the rigid pipes (2) (Fig. 4) to the front linkage (if
fitted).
- the gas-oil supply and return hoses on the
engine. Block their openings.
1
1
MA-02-05127A
Fig. 3
2
1
MA-02-05113A
Fig. 4
To Next Page
Loading...