MASSEY FERGUSON 6480 - Page 71

Massey Ferguson 6400 - Issue 2
02A01.5
Splitting - Front frame / Perkins engine
Preparing for disassembling
20. Cancel the front axle oscillation (all versions) by
sliding a suitable chock in at each side of the
support (1) (Fig. 9).
21. Chock the rear wheels.
22. Install (Fig. 11):
- a mobile stand under the front axle beam,
- a suitable sling under the front of the frame,
- a fixed axle stand under the engine sump.
Disassembly
23. Remove lateral screws (1) (Fig. 10).
24. With the help of an operator, loosen the screws
(2)(3) (Fig.10), simultaneously moving the frame
away from the engine.
When disassembling, use the sling to
reduce the risk of toppling of the front frame
assembly.
Screw dimensions
- M16 x 55 mm
- M16 x 60 mm
- M16 x 115 mm
- M20 x 190 mm
- M24 x 200 mm
Reminder
When disassembling, check that connections (hoses,
pipes and harnesses) are all disconnected.
Fig. 9
¤
H