Massey Ferguson 6400 - Issue 1
02C02.15
Splitting - GBA10 gearbox / Centre housing
73. When the elements are assembled, remove the
guide studs. Position the screws according to the
marks made when removed and tighten to a
torque of: (Fig. 10)
- Screws (1): 240 - 320 Nm
- Screws (5): 220 - 280 Nm
- Screws (6): 240 - 320 Nm
- Nuts (3): 300 - 400 Nm
Fig. 14
To Next Page
Loading...