5.Explanation of basic CV settings 18
5.1.Locomotive address 18
5.2.Serial and Parallel Data Transfer 19
5.3.Reset functions 19
6.CV – table (drive settings) 19
7.CV – table (sound settings) 22
7.1.Sound assignment 24
7.2.Standing sounds and noises 25
7.3.Random generator 25
7.4.Signals before start 25
7.5.Sound allocation for reed contacts 25
7.6.Total volume level and individual volume level 25
7.7.Volume control driving sound 25
8.Attachment 1: NMRA-Configuration 26
8.1.Attachment 2: Massoth-Configuration 26
8.2.Attachment 3: Switching output commands 26
8.3.Attachment 4: Dimming values 27
8.4.Attachment 5: Special function F1 - F5 27
8.5.Attachment 5a: Expanded special functions F2 + F4 + F6 27
8.6.Attachment 6: Default settings at resets 28
8.7.Attachment 7: Basic values of freely programmable driving curve 28
8.8.Attachment 8: Massoth-sound-configuration 28
9.Decoder programming + Update 28
9.1.Reading configuration variables (CVs) 29
9.2.Writing configuration variables (CVs) 29
9.3.Writing the configuration variables (Cvs) bit by bit 29
9.4.Register programming / writing Cvs indirectly 29
9.5.PoM Programming on Main (main track) 29
9.6.Software and Sound Update 29
10.Warranty 30
10.1.Warranty Claims 30
10.2.Technical specifications 30
11. Support 31
11.1. Manufacturer 31
eMOTION XLS Sound Decoder 3
To Next Page
Loading...
