Massoth eMOTION XLS - English

Summary Page
1.General and safety details 4
1.1.Layout of Terminals 4
2.Important information for the operation 4
2.1.Installation and Hook-Up 5
2.1.1.Connectors on the Upper Surface 5
2.1.2.Setup with a LGB
®
gear box 7
2.2.Manufacturer's settings of the eMOTION XLS Sound Decoder 7
2.3.Installation 7
3.Advanced setup 8
3.1.Connectors on the Lower Surface 8
3.2.Installation of the eMOTION XLS with a LGB
®
interface 8
3.3.Connection with the DCC interface cable 8
3.4.Massoth bus interface 9
3.5.Light and function outputs 9
3.6.Power buffer hook up 10
3.7.Reed contacts to trigger bell and whistle by track magnets 10
3.8.Motor control 11
3.8.1.Special driving functions 14
3.9.Analog mode 14
4.The Sound in the decoder 15
4.1.Driving sounds 15
4.1.1.Steam locomotive 15
4.1.2.Diesel locomotive 16
4.1.3.Electric locomotive 16
4.2.Additional sounds 16
4.2.1.Sound selection, number of loops and volume 16
4.3.Automatic sounds 17
4.3.1.Starting signal 17
4.3.2.Operational noises 17
4.3.3.Braking noises 17
4.3.4.Random generator 17
4.3.5.Standing noises 17
4.4.Loudspeaker + external volume control 17
4.4.1.Total volume 18
4.4.2.External volume control 18
4.4.3.Loudspeaker specifications 18
4.5.RPM control, control in- and outputs 18
4.5.1.Triggering whistle and bell by reed contacts 18
4.5.2.Trigger output for the pulsed smoke generator 18
eMOTION XLS Sound Decoder 2