4
Model No. 085-3175 | Contact us: 1-855-803-9313
Operation
WARNING
Before turning on the power source, please put the knob to OFF position.
To start the Grilling Grate:
1. First, connect the power and then turn on the grill by switching the knob to the right until the blue indicator lights up.
2. Continue to turn the knob until the arrow mark reaches the required cooking temperature.
If the inner temp is lower than the setting value, electric heating tube will heat circularly.
Note: If the product has an indicator light, the indicator light will light up when electric heating tube is working and turn
o if not working.
3. Allow 10 to 15 minutes for the GRILL SIDE surface to reach its full temperature to complete the initial seasoning
process or to begin grilling.
Notes About OUTDOOR USE
Be sure you have proper ventilation, and protect all other surfaces near the grill.
NEVER grill in the open rain or in standing water as this grill is an electric appliance. There is always a risk of electric shock
while operating this unit.
Grounding Instructions
This appliance shall be grounded while in use to protect the operator from electrical shock.
The appliance is equipped with a 3-conductor cord and a 2-prong grounding-type plug to fit the proper grounding-type
outlet. Plug into a GFCI-protected outdoor outlet, where available.