12
The regulator may make a humming or whistling noise during operation. This will not
affect safety or use of grill.
Save the cylinder cap and reinstall when not in use.
Cylinder supply system must be arranged for vapour withdrawal. Do not block the
pressure relief valve during use or storage.
Always remove 1 lb (465 g) cylinder from grill when transporting and when not in use.
6. Assembly Instructions
6.1 Getting Started
Please follow the assembly steps in the order that they are presented on the following
drawings.
Assemble the gas grill at the location that you intend to use it.
You may want to place an old towel or cloth at the assembly site to prevent scratches to
your deck and/or to prevent loss of loose parts.
Have a friend help. An assistant can make the assembly easier, by holding the parts in
place while you fasten nuts and bolts.
6.2 Installing the gas supply cylinder
(The gas cylinder is not provided with this unit.)
A gas cylinder complying with the requirements must be obtained before the LP unit can
operate.
Assembly
1. Unpack gas grill parts, inspect carton and gas grill for
any visible signs of damage. Any damage noted should
be reported to your dealer.
2. Remove and set aside all inner boxes and parts from the
master carton.
3. Remove and set aside all wrapping paper and additional
packaging from the parts.
4. Do not destroy carton or packaging until your grill is
com
letel
assembled and o
eratin
to
our
To Next Page
Loading...
Need help?
General
