4
Product no. 399-6488-6
ADDITIONAL IMPORTANT SAFEGUARDS
Instructions for the Electrical Cord and Plug
1. ELECTRICAL SHOCK HAZARD: Failure to follow these instructions can result in death, fire, or electrical shock.
•
Plug into a grounded 3 prong outlet.
•
DO NOT remove ground prong.
•
DO NOT use an adaptor.
•
DO NOT use an extension cord.
2. This unit MUST be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric
shock by providing an escape wire for the electric current. This unit is equipped with a cord having a grounding
wire with a grounding plug.
The plug must be plugged into an outlet that is properly installed and grounded.
3. WARNING: Improper use of the grounding plug can result in a risk of electric shock. If the plug does not fit
fully into the outlet, contact a qualified electrician. Do not attempt to modify the plug in any way.
4. A short power supply cord is provided to reduce the risk of becoming entangled or tripping over a long cord.
5. The manufacturer does not recommend using this machine in countries that do not support 120 V AC even if a
voltage adaptor, transformer, or converter is in use.
CO
2
(Carbon Dioxide) Gas
1. CO
2
gas can be dangerous! CO
2
cylinders contain high-pressure compressed gas, which can be hazardous if not
handled properly. Make sure you read and understand all the procedures for the CO
2
cylinders before installation.
2. Always connect the CO
2
cylinder to a regulator! Failure to do so may cause an explosion resulting in possible
death or injury when the cylinder valve is opened,
3. Never connect the CO
2
cylinder directly to the beer keg.
4. Always follow the correct procedures when changing the CO
2
cylinder.
5. Never drop or throw a CO
2
cylinder.
6. Always keep CO
2
cylinders away from heat. Store extra cylinders in a cool place (preferably 21°C/ 70°F). Fasten
securely with a chain when storing in an upright position.
7. ALWAYS ventilate and leave the area immediately if CO
2
leakage has occurred.
8. There are two safety devices in the pressure system in the form of a valve. One safety feature is on the CO
2
bottle. The second is on the regulator.
9. Never attempt to refill CO
2
cylinder yourself.
10. IMPORTANT! If the refrigerator has been placed in a horizontal or tilted position for any period of time, wait 8
hours before plugging in the unit.
SAVE THESE INSTRUCTIONS!
To Next Page
Loading...
Need help?
General
