e
26. Slide the sear burner drip tray (F) from
the back of burner box (A) to the sear burner
bracket. (Fig. 26)
27. Put a battery (H) into the electronic
ignition with correct pole direction.
(Please refer to the battery mark on the
side of the cap). Push and turn the knobs to
check if there are sparks produced between
the ignition pin and the main burner.
If not, please refer to the troubleshooting
section to solve the problem.
(Fig. 27)
26
F
A
Sear burner bracket
27
H
To Next Page
Loading...
