e
3. Remove the lamp screen. (Fig. 48)
4. Pull out the light bulb and
replace with a new bulb. (Fig. 49)
5. Reverse the instruction from “steps” 4-1
for installation.
Cleaning Method
Follow Steps 1-3 above for glass cover removal. Use a damp towel to clean the surface of
glass cover. Make sure the glass cover is completely dry before re-installing.
WARNING
Make sure the light switch is on “OFF” position and power plug is disconnected from
power outlet prior to cleaning the glass cover.
WARNING
The light glass cover should not be in contact with water or any other liquid when it’s
warm. Sudden change of temperature may cause cracks on glass cover.
WARNING
To ensure continued protection against electric shock:
1. Connect to properly grounded outlets only.
2. Do not expose to rain.
3. Keep extension cord connections dry and off the ground.
Lamp screen
48
49
Bulb
To Next Page
Loading...
