e
Orifice stud inside the air shutter
Grill Lighting Instructions
Checking orifices' alignment with burners
Orifices may shift during assembly and movement; therefore, check the orifices' alignment
with the burners according to the following illustrations before lighting.
Fig. 34 Main Burner and Orifice Relationship
Fig. 35 Sear Burner and Orifice Relationship
Lighting Instructions
1. Read instructions before lighting your grill.
2. Open lid during lighting.
3. Fully open cylinder valve.
4. Push the control knob in and turn the knob
to the left to “HIGH” position. Keep pressing the
knob until the burner is lit.
5. If ignition does not occur in 5 seconds,
turn the burner control off, wait 5 minutes,
and repeat the lighting procedure.
Fig. 36
To Next Page
Loading...
