21
OPERATING INSTRUCTIONS
Checking orifices alignment with burners
Orifices may shift during assembly and movement. Check the orifices alignment with the
burners according to the following illustrations before lighting.
Main Burner and Orifice Relationship
LIGHTING
Warning: Do not lean over grill when lighting.
1. Check that the control knobs are in the OFF position.
2. Open LP cylinder valve.
3. Open lid during lighting.
4. Press and turn the knob slowly to “HIGH” position. The
burner should light within three attempts.
5. If burner does not light, turn the knob to “OFF”, wait 5
minutes and then repeat step 4.
6. Once burner is lit, rotate knob to desired heating level
from High to Low.
FOR COMPLETE SHUTDOWN
1. Turn the knob to “HIGH” position first, then push in and turn to “OFF” position for complete
shut off.
2. Turn the LP gas tank valve OFF before remove the LP gas tank.
To Next Page
Loading...
Need help?
General
