To operate, you will need one precision-filled standard grill LP gas tank with external valve threads.
20 lb
9 Kg
17.9 in. / 45.5 cm
12.2 in. / 31 cm
W LP gas tank must be properly disconnected
and removed prior to moving this grill.
CAUTION
Securing LP Gas Tank
Secure tank by sliding the tank retainer wire over shoulder of
LP gas tank.
Inserting LP Gas Tank
Place precision-filled LP gas tank upright into the notches
in the right cart frame so the tank valve is facing the gas
line connection.
Connecting LP Gas Tank
1. Before connecting, be sure there is no debris caught in the
head of the LP gas tank, head of the regulator valve or in
the head of the burner or burner ports.
2
clockwise until it stops.
Disconnecting LP Gas Tank
. Before disconnecting, make sure the LP gas tank valve is “CLOSED”.
2
knob counterclockwise until it is loose.
W CAUTION: LP gas tank must be properly disconnected
and removed prior to moving this grill.
3. Place the protective cap cover on the LP tank and store the tank
outdoors in a well ventilated area out of direct sunlight.
19
INSTALLATION INSTRUCTIONS
To Next Page
Loading...
Need help?
General
