7. PIPELINE INSTALLATION
This product shall be installed and maintained by a qualified person who is
proficient with this instruction.
The installation and operation must be in accordance with local regulations
and the recognized operation criteria.
Install the pipeline properly according to the requirement of this instruction,
and protect it from freezing.
1. Make the inlet pipeline as short as
possible and keep bends as few as
possible during installation. Keep the
pump in a dry and well-ventilated place.
In condition of outdoor installation
outdoor, make sure the pump is properly
protected by weather-proof covering.
2. Installation of valves on inlet and outlet
pipelines is necessary. The valve installed
on inlet pipeline shall be one-way valve.
To Next Page
Loading...
