The control can be restricted to prevent unwanted use or temperature adjustments.
Locking the Panel prevents the controller from being used, but all automatic functions are still
active.
Locking the Settings allows Jets and other features to be used, but the Set Temperature and other
programmed settings cannot be adjusted.
Settings Lock allows access to a reduced selection of menu items. These include Set Temperature,
Invert, Lock, Utilities, Information and Fault Log. They can be seen, but not changed or edited.
Restricting Operation
Unlocking
An Unlock Sequence using the navigation buttons can be used from the Lock Screen. The Unlock
Sequence is the same for both Panel Lock and Settings Lock.
To Next Page
Loading...
