PROGRAM MEMORY FAILURE*
At Power-Up, the system has failed the Program Checksum Test. This indicates a problem with the
firmware (operation program) and requires a service call.
THE SETTINGS HAVE BEEN RESET (PERSISTENT MEMORY ERROR)*
Contact your dealer or service organization if this message appears on more than one power-up.
THE CLOCK HAS FAILED*
Contact your dealer or service organization.
CONFIGURATION ERROR (SPA WILL NOT START UP)
Contact your dealer or service organization.
A PUMP MAY BE STUCK ON
Water may be overheated. POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your
dealer or service organization.
HOT FAULT
A Pump Appears to have been Stuck ON when spa was last powered
POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service organization.
To Next Page
Loading...
