SWIM SPA - CONTROLS: HOLD (STANDBY)
42
DO NOT DIVE.
HOLD MODE
Hold Mode is used to disable the pumps during service functions like cleaning or replacing
the filter. Hold Mode will last for 1 hour unless the mode is exited manually.
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button,
depending on control panel configuration
Waiting time - varies depending on function
OR
While the Temperature is
still flashing, press Light
repeatedly until HOLD
appears in the LCD.
SET
RANGE
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
Approx.
10 sec.
Main Screen
READY
RANGE
FLTR1
Approx.
3 sec.
or
To next item in
Main Menu
SET
To Next Page
Loading...
