SWIM SPA - CONTROLS: SYSTEM-RELATED
MESSAGES
48
DO NOT DIVE.
* This message can be reset from the topside panel with any button press.
MEMORY FAILURE - CHECKSUM ERROR*
At Power-Up, the system has failed the Program Checksum Test. This indicates a problem
with the firmware (operation program) and requires a service call.
MEMORY FAILURE - PERSISTENT MEMORY ERROR*
Contact your dealer or service organization if this message appears on more than one
power-up.
MEMORY FAILURE - CLOCK ERROR*
Contact your dealer or service organization.
CONFIGURATION ERROR – SWIM SPA WILL NOT START UP
Contact your dealer or service organization.
A PUMP APPEARS TO BE STUCK ON
Water may be overheated. POWER DOWN THE SWIM SPA. DO NOT ENTER THE WATER.
Contact your dealer or service organization.
A PUMP APPEARS TO HAVE BEEN STUCK ON WHEN SWIM SPA WAS LAST POWERED
POWER DOWN THE SWIM SPA. DO NOT ENTER THE WATER. Contact your dealer or service
organization.
To Next Page
Loading...
