To Next PageTo Next PageWhy does my Masterbuilt Smoker take so long to heat up?
If your Masterbuilt Smoker takes longer than 60-70 minutes to heat up, avoid using an extension cord by setting up the smoker closer to a power outlet. Also, make sure the door is properly closed and the latch is securely fastened.
What to do if the power light won’t come on for Masterbuilt ES40G1.5DW1 Smokers?
If the power light on your Masterbuilt Smoker won’t come on, start by checking the wall connection to ensure it's properly plugged in. Then, check your household breakers to see if they have tripped, and ensure that other appliances are not operating on the same electrical circuit.
Why is there no smoke from my Masterbuilt Smoker?
If your Masterbuilt Smoker isn't producing smoke, the most likely reason is that you need to add wood chips.
How to get smoke at low setting on Masterbuilt Smokers?
If you're not getting smoke at a low setting on your Masterbuilt Smoker, increase the temperature to 275°F for 8 to 10 minutes, or until the wood chips start to smolder. Then, reduce the temperature to your desired low setting.
Why is grease leaking from my Masterbuilt ES40G1.5DW1?
If grease is leaking from your Masterbuilt Smoker's door and legs, it could be due to a few reasons. First, ensure the drip pan is correctly positioned so that the hole lines up with the drain hole at the bottom. Second, there might be excess grease or oil buildup, so cleaning the smoker is recommended. Lastly, check the drain tube at the back to ensure it's not blocked and is draining properly.
General| Brand | Masterbuilt |
|---|---|
| Model | ES40G1.5DW1 |
| Category | Smokers |
| Type | Electric Smoker |
| Fuel Type | Electric |
| Cooking Area | 40 inches |
| Temperature Range | 100°F to 275°F |
| Power Source | Electric |
| Wattage | 800 Watts |
| Temperature Control | Digital |
| Digital Control Panel | Yes |
| Removable Drip Pan | Yes |
| Wood Chip Loader | Yes |
| Door Lock | No |
| Legs | Yes |
| Wheels | Yes |
| Capacity | 4 Racks |
