EasyManua.ls Logo

Masterbuilt MB20261719 - User Manual

Masterbuilt MB20261719
56 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Manual Code: 9826190006 190425-GSB
MWG 600B
PELLET GRILL
GRIL À GRANULES
PARRILLA DE PERLAS DE MADERA
Manual applies to the following model number(s)
Le manuel s’applique aux numéros de modèle suivants
El manual se aplica a los siguientes números de modelo
These numbers are located on the rating label of the grill.
Ces numéros se trouvent sur la plaque signalétique du gril.
Estos números se ubican en la etiqueta posterior de la parrilla.
Mfg. Date - Serial Number | Date de fabrication - Numéro de série |
Fecha Fabricado - Número de serie
Your model number | Votre numéro de modèle | Su número de modelo
MB20261719, MB20261819
Please record this information immediately and keep in a
safe place for future use.
Veuillez noter cette information immédiatement et la con-
server dans un endroit sûr pour une utilisation future.
Por favor, registrar esta información inmediatamente y
guardar en un lugar seguro para su uso futuro.
IMPORTANT | IMPORTANTE
Master it. Masterbuilt.
Master it. Masterbuilt.
Welcome to the family. Let’s get started.
Bienvenue à la famille. Commençons.
Bienvenido a la familia. Empecemos.

Table of Contents

Questions and Answers

  • S
    Sandra MarshAug 18, 2025
    Why doesn’t my Masterbuilt MB20261719 fire on smoke setting?
    • C
      Christopher FrenchAug 18, 2025
      If your Masterbuilt Grill doesn't fire on the smoke setting, it might be because the “P” setting on the digital controller is set too high; review the Digital Controller Functions in the Operating Instructions section to adjust it. Make sure the power switch is OFF and the power cord is disconnected. Open the lid and remove the cooking grate, grease deflector, and heat diffuser. Remove all unburned pellets and ash from the crucible, using a shop-vac if needed, ensuring the grill is cold to prevent fire hazards. Put the heat diffuser, grease deflector, and cooking grate back in place and follow the INITIAL LIGHTING INSTRUCTIONS.
  • Y
    ykingNov 8, 2025
    How to fix a Masterbuilt MB20261719 that fails to ignite?
    • J
      Joshua RiveraNov 9, 2025
      To address a Masterbuilt Grill that won't ignite, start by turning the power switch to OFF and disconnecting the power cord. Remove any food, cooking grate, grease deflector, and heat diffuser. Clear all unburned pellets and ash from the crucible, ensuring the grill is COLD to prevent fire hazards. Restart the grill to check if the ignition cycle works. Verify power at the outlet and reset the ground fault interrupter if needed. Inspect the power cord fuses by disconnecting the cord, removing the controller, and checking the fuse on the back, replacing it if blown. Finally, verify the element, intake fan, and auger drive are functioning by unplugging the element connector (red/white wires), plugging the power cord into a grounded outlet, and turning the power switch to ON. Check that the i...
  • R
    Rose GarciaNov 23, 2025
    What to do if no pellets are delivered to the crucible in my Masterbuilt MB20261719 Grill?
    • I
      Isaiah PowersNov 23, 2025
      If no pellets are being delivered to the crucible of your Masterbuilt Grill, first check that there are pellets in the pellet hopper. Remember that it can take up to seven minutes for pellets to travel from the pellet hopper to the crucible. If the issue persists, ensure the power switch is OFF and the power cord is disconnected. Remove the controller and the pellet hopper to access the auger drive motor and intake fan connections. Unplug the auger drive motor (orange/white wire pair) and the intake fan (purple/white wire pair), then reconnect both. If the auger drive motor is working, the digital controller may need to be replaced. If the auger drive motor is not working, but the intake fan is working, the problem is the auger system which may need to be checked. Locate the small fan blad...
  • K
    Kevin BeasleyDec 3, 2025
    How to fix a Masterbuilt MB20261719 Grill when foreign objects or wet pellets jam the auger system?

    Summary

    General Warnings

    Carbon Monoxide Hazard

    Warnings and Important Safeguards

    Assembly Instructions: Legs and Shelf

    Step 1: Assemble Legs

    Assemble the left and right front and rear legs using specified hardware.

    Step 2: Attach Bottom Shelf

    Attach the bottom shelf to the assembled leg structure using hardware.

    Assembly Instructions: Brackets and Wheels

    Step 3: Attach Leg Support Brackets

    Attach the leg support brackets to the leg assembly using hardware.

    Step 4: Attach Wheels

    Attach the locking caster wheels and regular wheels to the leg assembly.

    Assembly Instructions: Grill Body and Shelf

    Step 5: Attach Grill Body Components

    Install hardware to connect the grill body to the frame.

    Step 6: Attach Side Shelf

    Attach the side shelf and its bracket to the grill body.

    Assembly Instructions: Lid and Diffuser

    Step 7: Attach Lid Components

    Install heat shield, lid handle collar, and lid handle onto the grill lid.

    Step 8: Install Heat Diffuser

    Place the heat diffuser inside the grill body.

    Assembly Instructions: Grease Tray

    Step 9: Install Grease Tray and Flange

    Place the longer flange into the grease tray and position it correctly.

    Assembly Instructions: Racks and Bucket

    Step 11: Install Warming Rack

    Slide the warming rack into the designated channels inside the grill.

    Step 12: Attach Grease Bucket

    Hang the grease bucket from the designated hook.

    Initial Lighting Instructions

    Lighting the Grill

    Step-by-step guide for the first time lighting the grill and when it runs out of pellets.

    Seasoning the Grill

    Lighting Procedure Details

    Starting Grill and Temperature Settings

    Troubleshooting Lighting Issues

    Operating Instructions

    Safety: Clearance to Combustibles

    Grease Fire Prevention and Handling

    Digital Controller Functions

    Cleaning and Maintenance

    Regular Cleaning

    Cleaning Ash from Crucible

    Troubleshooting: Ignition Issues

    Grill Fails to Ignite

    Procedures to follow if the grill does not ignite or the fire goes out.

    Troubleshooting: Auger System

    No Pellets Delivered to Crucible

    Troubleshooting: Fire Issues

    Grill Doesnt Fire on Smoke Setting

    Masterbuilt 1-Year Limited Warranty

    Masterbuilt MB20261719 Specifications

    General IconGeneral
    BrandMasterbuilt
    ModelMB20261719
    CategoryGrill
    LanguageEnglish

    Related product manuals