FOR SAFETY, heating element only heats up when properly attached to mounting bracket (see
previous page for instructions). This is a powerful heating element and may cause circuit breaker to
trip. Minimize occurrences by operating any additional appliances on separate circuit. Tripping circuit
breaker will NOT damage unit or electrical system.
PRE-HEATING oil or water may take up to 45 minutes. Take advantage of this time to prepare foods
for cooking. For optimum performance, completely pre-heat unit to cooking temperature before frying
or boiling foods. Keep lid CLOSED during pre-heating and cooking. This will reduce heating time and
keep temperature more consistent.
POWER LIGHT (orange) will illuminate indicating breakaway power cord is plugged into outlet. READY
INDICATOR LIGHT (green) will turn ON when set temperature is reached. Indicator light will turn on and
off to reflect set temperature.
CAUTION
Do not use appliance without water or oil in pot. Unit can be severely damaged if heated while
empty.
Place unit on level and stable surface to prevent tipping.
Hot when in use.
Do not overfill pot past max fill line.
Do not mix different types of oil at the same time.
Never melt fat or lard on the heating element or in basket.
Risk of fire and electric shock. Replace only with manufacturer’s cord set, part number
9001150010.
TURKEY PREPARATION
To Next Page
Loading...
