MasterCraft 054-7120-4 User Manual

ANGLE GRINDER - 054-7120-4
12
Installing the side handle (fig 2)
The side handle is used to guide and balance the
tool and can be threaded into the front housing
on either side of the tool, depending on personal
preference and comfort. Use the side handle for
safe control and ease of operation.
WARNING!
Failure to unplug the tool from the
power source when assembling parts,
making adjustments, or changing application tools could result in accidental starting and
cause serious injury.
1. Unplug the angle grinder.
2. The side handle may be installed on the right side or the left side of the tool. Thread the side handle
into the desired operating position.
3. Securely tighten the side handle by turning it clockwise.
OPERATING INSTRUCTIONS
fig 2

MasterCraft 054-7120-4 Specifications

General

Brand	MasterCraft
Model	054-7120-4
Category	Grinder
Language	English