EasyManuals Logo

MasterCraft 054-7120-4 User Manual

MasterCraft 054-7120-4
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
ANGLE GRINDER - 054-7120-4
17
MAINTENANCE
General maintenance
Before each use:
1. Inspect the angle grinder, the ON/OFF switch, the cord and the accessories for damage.
2. Check for damaged, missing, or worn parts.
3. Check for loose screws, misalignment or binding of moving parts, or any other condition that may
affect the operation.
4. If abnormal vibration or noise occurs, turn the tool off immediately and have the problem
corrected before further use. Unplug the tool from power source before cleaning or performing any
maintenance.
WARNING!
Do not allow brake fluids, gasoline, petroleum-based products, penetrating oil, etc. come
into contact with plastic parts. These substances contain chemicals that can damage,
weaken, or destroy plastic.
WARNING!
When servicing, use only identical replacement parts. The use of any other parts may
create a hazard or cause damage to the product.
WARNING!
If the supply cord is damaged, it must be replaced with a specially prepared cord available
through the service organization.
WARNING!
Use only accessories that are recommended for this angle grinder by the manufacturer.
Accessories that may be suitable for one tool may become hazardous when used with
another tool.
WARNING!
Before cleaning or performing any maintenance, the tool should be unplugged from the
power supply.
WARNING!
To ensure safety and reliability, all repairs should be performed by a qualified service
technician.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCraft 054-7120-4 and is the answer not in the manual?

MasterCraft 054-7120-4 Specifications

General IconGeneral
BrandMasterCraft
Model054-7120-4
CategoryGrinder
LanguageEnglish

Related product manuals