MasterCraft 054-7120-4 User Manual

ANGLE GRINDER - 054-7120-4
18
Lubrication
All of the bearings in this product are lubricated with a sufficient amount of high grade lubricant for the
life of the unit under normal operating conditions. Therefore, no further lubrication is required.
Cleaning
WARNING!
To avoid accidents always disconnect the tool from the power supply before cleaning or
performing any maintenance. The tool may be cleaned most effectively with compressed dry air.
Always wear safety goggles when cleaning tools with compressed air.
Ventilation openings and switch levers must be kept clean and free of foreign matter. Do not attempt to
clean by inserting pointed objects through openings.
Storage and handling of grinding wheels
When not in use, grinding wheels should be stored carefully in a rack or box to protect them from
chipping or breakage. All grinding wheels must be handled carefully to prevent dropping and bumping.
MAINTENANCE

MasterCraft 054-7120-4 Specifications

General

Brand	MasterCraft
Model	054-7120-4
Category	Grinder
Language	English