13
MAINTENANCE
Before cleaning or performing any maintenance, make sure the sander has been disconnected from
the power supply. Keep all ventilation openings clean. Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to damage from various types of commercial solvents and may be
damaged by their use. Use a clean cloth to remove dirt, oil and grease.
MAINTENANCE
WARNING!
• Do not let brake fluids, gasoline, petroleum-based products, penetrating oil, etc., come in contact with plastic
parts. They contain chemicals that can damage, weaken or destroy plastic.
• To ensure safety and reliability, all repairs should be performed by a qualified service technician.
• If the power cord is damaged, it must be replaced with an identical replacement part and be installed by an
authorized service technician.