25
20V max* LITHIUM-ION CORDLESS CIRCULAR SAW - 054-8332-4
MAINTENANCE
Changing the blade
(g 18–20)
WARNING!
Always remove the battery pack from
the saw when assembling parts,
changing blades or making
adjustments. Failure to obey this
warning could cause serious personal
injury.
WARNING!
A 5 1/2" blade is the maximum blade capacity of the saw. Use only a 5 1/2" blade when
replacing a worn or damaged blade. Never use a blade that is too thick to allow the outer
blade washer to engage with the flats on the spindle. Thicker blades will prevent the blade
screw from securing the blade on the spindle, resulting in serious personal injury.
WARNING!
Be sure to wear protective work gloves while handling a saw blade. The blade can injure
unprotected hands.
1. Remove the battery pack from the saw.
2. Loosen the depth-of-cut quick adjustment lever. Raise the saw to the maximum height and tighten the
depth-of-cut quick adjustment lever. This practice allows easier access to the blade mounting.
fig 18
fig 19
To Next Page
Loading...
Need help?
General
