WARNING!
Do not use cutting discs rated less than the speed of this tool. Failure to heed this warning could
result in personal injury.
15
ASSEMBLY INSTRUCTIONS
14
On/Off switch:
This saw has an easy-access power switch located below the front rail. To lock the switch in the Off position,
remove the switch key from the switch. Place the key in a location that is inaccessible to children and others
not qualified to use the tool.
7" (17.8 cm) Cutting disc:
A 7" (17.8 cm) tile cutting disc is included with your tile saw.
45° vertical fence:
Beveled 15°, 30° and 45° cuts can be made using the 45° vertical fence.
Mitre cutting guide:
The mitre cutting guide is fully adjustable for diagonal cuts and mitre cuts.
Parallel cutting guide:
Parallel cutting guide is fully adjustable for making cross cuts and using the mitre cutting guide.
Upper protective guard:
The upper protective guard prevents accidental contact with the cutting disc and stops workpiece parts and
cooling water from being flung out. The upper protective guard must always be mounted during the operation
and can be lowered to the workpiece.
Lower protective guard:
The lower protective guard prevents accidental contact with the cutting disc and stops workpiece parts and
cooling water from being flung out.
Metal bracket:
The metal bracket prevents a workpiece from being caught by the cutting disc and being hurled at the
operator. The metal bracket must always be mounted during operation.
Parallel cutting guide scale:
The parallel cutting guide scale shows distance from the parallel cutting guide to the saw blade.
Locking knob (for parallel cutting guide):
The locking knob is located on the front of the parallel cutting guide to release or lock the parallel cutting
guide with respect to the working table.
PACKAGE CONTENTS
NO. Description Qty. Illustration
Tile saw assembly
Parallel cutting guide, spring, clamp, flat washer
and locking knob
Mitre cutting guide
Upper protective guard assembly
Metal bracket
Cutting disc
Extension table and locking knob
Water reservoir plug
1
2
3
4
5
6
7
8
1
1
1
1
1
1
1
1
KNOW YOUR TILE SAW
model no. 055-6778-4 | contact us 1-800-689-9928
To Next Page
Loading...
