MasterCraft 058-8386-8 User Manual

11 12
AIR COMPRESSOR 11-GALLON (41.6 L) - 058-8386-8AIR COMPRESSOR 11-GALLON (41.6 L) - 058-8386-8
Assembly
1. Unpack the air compressor. Inspect the unit for damage. If the unit has been damaged, contact the
retailer immediately.
THE CARTON SHOULD CONTAIN:
• Air compressor
• O wner’s manual
• Air
2. Check the air compressor’s identification label to ensure that you have purchased the intended
model and that it has the required pressure rating for its intended use.
3. Positioning of the air compressor:
a. Position the air compressor near an electrical outlet.
b. The compressor must be at least 12” (31 cm) from any wall or obstruction, in a clean, well-
ventilated area to ensure sufficient air flow and cooling.
c. Place the air compressor on the floor or a hard, level surface. The air compressor must be
level to ensure proper drainage of the moisture in the tank.
> 12" /
31 cm
Wall
INTENDED USE
ASSEMBLY
058-8386-8-Mastercraft-11G-3HP-Air-Compressor-EN-08.indd 11-12 7/4/12 11:26 AM
Air Tool
Tool Compatibility Chart
Operates Tool
Continuously
Operates Tool
Intermittently
Not Recommended

MasterCraft 058-8386-8 Specifications

General

Brand	MasterCraft
Model	058-8386-8
Category	Air Compressor
Language	English