IMPORTANT INFORMATION
13
AIR-POWERED GRAVITY-FEED SPRAY GUN KIT 058-9311-0
Storage
• Rotate the paint adjusting knob in a counterclockwise direction and open the knob when the
gun is not in use. This will reduce spring tension on the needle fluid tip.
• Clean the Air-powered Gravity-feed Spray Gun thoroughly and slightly lubricate it after using
and before storing.
CAUTION!
Potential hazard that may result in moderate injury or damage to
e
quipment.
• Incomplete or improper cleaning could cause function failures and a
degradation of the tool. Failure to comply may result in moderate injury or
damage to equipment.
To Next Page
Loading...