Page 11
Fig. 5
7. Choose the desired accessory and insert onto
the end of the hose or extension wand (Fig. 6)
.
Fig. 6
8. Verify that the switch is in the 'O' OFF position
before plugging the power cord into the outlet.
Plug the power cord into the outlet (Fig. 7).
Fig. 7
9. Turn the motor on by flipping the on/off switch
to the ‘I’ ON position and begin vacuuming
(Fig. 8).
Fig. 8
10. Once you have completed vacuuming, flip
the on/off switch to the ‘O’ OFF position and
unplug the power cord from the outlet.
O = OFF I = ON
DO NOT USE THE CARTRIDGE FILTER FOR
LIQUID VACUUMING.
DO NOT USE THE COLLECTION BAG FOR
LIQUID VACUUMING.
DRY VACUUM OPERATION
To Next Page
Loading...
