The following accessories may be used with this angle grinder. Only the grinding disc is supplied
with this tool. Others must be purchased separately.
3" wire cup brushes
4" wire wheels
4½" or 5" grinding wheels
4½" or 5" abrasive cutting wheels
4½" or 5" diamond cutting wheels
4½" or 5" sanding discs
4½" or 5" sanding flap discs
WARNING: Accessories must be rated for at least 11,800 RPM. Grinding wheels and
accessories rated below 11,800 RPM may explode causing serious injury. Every grinding wheel
must have a 7/8" arbor hole and not exceed 5" diameter. Accessories such as sanding discs,
sanding flap discs and wire wheels must fit the 5/8" – 11 UNC threaded spindle. Never use a
circular saw blade or a carving chain with this tool. They cannot be properly guarded and could
cause serious injury.
To Next Page
Loading...
