To Next PageTo Next Page
Need help?Do you have a question about the Mastervolt CHARGEMASTER PLUS 24/110-2 and is the answer not in the manual?
General| Input Voltage | 90-265 VAC |
|---|---|
| Output Current | 110 A |
| Number of Battery Outputs | 2 |
| Efficiency | > 90% |
| Protection Features | Over temperature, Short circuit |
| Input Frequency | 50/60 Hz |
| Output Voltage | 24 VDC |
| Cooling | Fan |
Warns about the risk of explosive gases near lead-acid batteries and work environment.
Safety measures to take when working near batteries, including PPE and emergency aid.
Specific warnings about charging different battery types and handling procedures.
Safety steps for connecting and disconnecting DC power to prevent arcs and damage.
Safety precautions specifically for charging a battery located inside a vehicle.
Safety precautions when connecting to a battery that is physically outside a vehicle.
Details recommended DC cable cross-sections and wiring colors for different models.
Specifies AC wire cross-sections and connection colors for various voltage inputs.
Emphasizes AC safety grounding and RCD/Breaker requirements for protection.
A detailed, step-by-step visual guide for the physical installation of the charger.
Steps to follow after installation to verify wiring and initiate charger operation.
Explains how to configure charger settings using DIP switches for battery types and networks.
Details configurable parameters like language, device name, charge method, and battery type.
Guides on configuring the charger within a CZone network using the configuration tool.
Details the three charging stages: Bulk, Absorption, and Float, for optimal battery charging.
Lists detailed technical specifications including input/output, dimensions, weight, and capabilities.
