Need help?Do you have a question about the Mastervolt ChargeMaster 12/15-2 and is the answer not in the manual?
General| Input Voltage | 90 - 265 VAC |
|---|---|
| Output Voltage | 12 V |
| Output Current | 15 A |
| Efficiency | > 90% |
| Weight | 1.9 kg |
| Charging Voltage Bulk | 14.4 V |
| Charging Voltage Absorption | 14.4 V |
| Charging Voltage Float | 13.8 V |
| Charging Voltage Extended Float | 13.2 V |
| Number of Battery Outlets | 2 |
| Charging Algorithm | 3-stage (Bulk, Absorption, Float) |
| Protection | Short-circuit, Overload, Overtemperature |
Identifies key connectors and jumpers on the device for various settings and outputs.
Provides guidance on the environmentally responsible disposal of the product as WEEE.
Details the ChargeMaster 12/15-2 as a battery charger for lead batteries and permanent installations.
Outlines mounting, connection, and initial operation steps for the battery charger.
Explains the function of the green LED indicator during charging and completed cycles.
Describes the use of jumpers for specific charger applications like diode compensation or gel/AGM.
Lists essential safety precautions for charger installation and operation.
Covers warranty terms, conditions, and limitations of Mastervolt's liability.
Illustrates the wiring connection for mains supply and battery banks.
Lists technical details including model, operating conditions, input/output characteristics, and safety features.
Details the three-step automated charging process (BULK, ABSORPTION, FLOAT).
Provides a dimensional drawing of the ChargeMaster 12/15-2 unit in millimeters.
To Next Page