Mastervolt Mac Plus 2/12-50 - Page 33

MAC-PLUS
33
Value
Meaning
Factory setting
Adjustable range
Output alarm
High alarm on
High output voltage alarm on
15.25 / 30.50 V
8-16 / 16-32 V
High alarm off
High output voltage alarm off
14.75 / 29.50 V
8-16 / 16-32 V
Low alarm off
High output voltage alarm off
11.00 / 22.00 V
8-16 / 16-32 V
Low alarm on
High output voltage alarm on
10.00 / 20.00 V
8-16 / 16-32 V
Low alarm delay
Low output alarm delay time
30 s
0-300 s
DIP switch
12345678
DIP switch state 0=off, 1=on
0
0,1
Event source
(available in upcoming
software update)
Description
Off
Device state is Off
Standby
Device state is Standby
Charging
Device state is Charging
Error
Device state is Error
Bulk
State of charge is Bulk
Absorption
State of charge is Absorption
Float
State of charge is Float
Any alarm
Any of the alarms is triggered
Event command
Description
Standby
Command to switch on/off the Mac Plus. If the Mac Plus was switched off
by means of this event command, it will switch on again when it come out
of sleep mode.
Bulk
(available in upcoming
software update)
Command to start the Bulk state of charge
Absorption
(available in upcoming
software update)
Command to start the Absorption state of charge
Float
(available in upcoming
software update)
Command to start the Float state of charge