ADDITIONAL INFORMATION
10 September 2008 / MasterBus - USB interface / EN
5 ADDITIONAL INFORMATION
5.1 ORDERING INFORMATION
Part number Description
77040000* MasterBus terminating device*
77040020 MasterBus connection cable (UTP patch cable), 0,2m / 0.6ft
77040050 MasterBus connection cable (UTP patch cable), 0,5m / 1.6ft
77040100 MasterBus connection cable (UTP patch cable), 1,0m / 3.3ft
77040300 MasterBus connection cable (UTP patch cable), 3,0m / 10ft
77040600* MasterBus connection cable (UTP patch cable), 6,0m / 20ft
77041000 MasterBus connection cable (UTP patch cable), 10m / 33ft
77041500 MasterBus connection cable (UTP patch cable), 15m / 49ft
77042500 MasterBus connection cable (UTP patch cable), 25m / 82ft
77050000 Complete set to assemble UTP patch cables. Delivery includes: 100m / 330ft UTP cable, 50 pcs.
modular jacks and crimping tool
* These parts are standard included with the delivery of the MasterBus - USB interface
Mastervolt can offer a wide range of products for your electrical installation, including an extended program of
components for your MasterBus network or MasterVision switchboard.
See our website www.mastervolt.com for a complete overview of all our products
5.2 EC DECLARATION OF CONFORMITY
Manufacturer Mastervolt
Address Snijdersbergweg 93, 1105 AN Amsterdam
The Netherlands
Herewith declares that:
Product:
77030100 MasterBus - USB interface
Is in conformity with the provision of the EC EMC directive 89/336/EEC and amendments 92/31/EEC, 93/68/EEC.
The following harmonised standards have been applied:
Generic emission standard: EN 50081-1:1992
Generic Immunity standard: EN 50082-1:1997
Safety directive 2006/95/EC, with the following standard:
Low voltage standard: EN 60950: 2000
Amsterdam,
P. F. Kenninck,
General Manager MASTERVOLT