Match PP 82DSP - PC Configuration; ATF DSP PC-Tool Software

21
It is possible to freely congure the PP 82DSP with
our DSP PC-tool software. The user interface is de-
signed for easy handling of all functions and allows
to individually adjust all eight DSP channels.
Prior to connecting the amplier to your PC, visit our
website and download the latest version of the PC-
tool software. Check from time to time for software
updates in order so that your amplier is always up-
to-date.
You will nd the software and the respective user
manual on www.audiotec-scher.com.
We strongly recommend to carefully read the user
manual before using the software for the rst time in
order to avoid any complications and failures.
Make sure that the amplier is not connected to
your computer before the software and USB driver
is installed!
To install the software follow the next steps:
1. Download the PC-tool software from the web-
site www.audiotec-scher.com
2. Install the software on your computer. During
that process the required USB driver will be au-
tomatically installed as well.
3. After the software installation processed is
completed you can now connect the amplier to
your PC using the provided USB cable.
4. Turn the amplier on and then start the soft-
ware. If the rmware of the amplier is not the
latest version it will automatically be updated on
the currently selected memory position.
5. You are now ready to congure the PP 82DSP
according to your demands.
Connection to a PC
ATF DSP PC-Tool
Equalizer
Time
alignment
Output
level
EQ ne
adjustment
Channel
conguration
Frequency
graph
Channel
selection
Device
conguration
Highpass lter
Lowpass lter