6
CHAPTER 3
DANGER
Consult chapter “DANGEROUS PARTS AND RESIDUAL RISKS” before proceeding.
The instructions of this section must be respected during the transport phases of the appliance in
following situations:
The lifting and the storing
The first installation
The further installations
The appliance is generally delivered in a wooden case movable by a forklift.
Pay attention during the lifting always follow the transport versus as labelled on the case. The use of
forklift or crane is recommended. Avoid the use of chains for the case lifting preferring whenever is
possible belts and hempen ropes.
ATTENTION
The moving of the packing with lifting systems must be made with caution and
respecting the indications given on the packing itself.
Pay attention to avoid impacts and turnovers of the packing.
ATTENTION
Protect the machine from the atmospheric agents. Water and humidity could oxidise it,
damaging it seriously.
After removing the package, check that any parts of the machine are not damaged. In case of doubt, DO
NOT USE THE MACHINE and ask the manufacturer.
DANGER
The materials used for the package (plastic, polystyrene, screws, nails, wood etc.) have
to be kept far from children. They must be thrown away in a proper collection centre.
ATTENTION
Pay attention to avoid impacts and turnover.
ATTENTION
Before throwing away the package, pay attention that any accessories, manuals,
documents, spare parts are not inside.
The machine has to be placed in an environment suitable for the aim it has been conceived for (in a
laboratory protected by the atmospheric agents). Skilled operator must do the installation.
ALLOWED TEMPERATURE
ALLOWED HUMIDITY
MAX HEIGHT OVER SEA LEVEL
As previously explained, this appliance has been projected for laboratory working, therefore it is
recommended to place it in an environment having a constant temperature.
The machine must be installed so that it is free from each side in order to be able to carry out easily
the maintenance operations.
No authorised people and no dangerous objects must be near the machine.
To Next Page
Loading...