Conference
Conference 3-Party
1st call - 2nd call - Flash -*3 - three way speech is established
Conference - Dial-In
Schedule a Conference:
*19 - 1 - Conference Number - Assign 4 digit Conference Password
Initiate/Join the Conference:
*19 - 2 - Conference Number - Conference Password
Cancel the Conference:
While in active Conference - Flash - Dial 190
Conference - Multiparty
Multiparty Conference:
In speech with First Call - Flash - Second Call - Flash - *3 - 3-party Conference is
established - Flash - Third Call - *3 - Fourth call....... - Repeat till you have include
desired number of parties.
Temporarily Leave Conference:
Flash - 191
Rejoin Conference:
Go Off-Hook - 191
Permanently Leave the Conference:
While in active Conference - Go On-Hook
Cancel Conference:
Flash - 190 - Error Tone - Go On-Hook
After the Dial-In Conference has been initiated, it functions as a Multiparty Conference.
Any participant can be Included, Temporarily Leave, Rejoin the Conference or
Permanently Leave the Conference. Refer Conference - Multiparty for instructions.
SLT users cannot Remove any party from the Multiparty Conference.
Call Toggle
In speech with party 1 - Flash - Dial number of party 2 - Speech with party 2 - Flash -
Dial 1 - Speech with party 1 - Flash - Dial 1 - Speech with party 2
Call Transfer
Transferring call to an Extension:
Speech with Extension/Eternal Number - Flash - Extension (Transfer Target) - Go
On-Hook
Transferring call to Trunk:
Speech with Extension / External Number - Flash - TAC - External Number
(Transfer Target) - Go On-Hook
Calling Line Identification Restriction (CLIR)
To enable CLIR : Dial 1031 - Confirmation Tone - Go On-Hook
To disable CLIR : Dial 1030 - Confirmation Tone - Go On-Hook
Cancel all Features of an Extension
Dia l 1051 - Confirmation Tone - Go On-Hook
The following features, if set, will be cancelled:
Auto Answer
Auto Call Back
Auto Redial
Background Music
Call Forward
Do Not Disturb
Hot Line
Trunk Reservation
Walk-In Class of Service
To Next Page
Loading...
