Matrix G7-S33 - Page 19

19
ASSEMBLY
STEP 2 | TIE ROD TO SWINGARM ASSEMBLY INSTRUCTIONS & NOTES
PART 3: ARM ASSEMBLY
ID DESCRIPTION QUANITY
26 M6 X 12L SHC (Right Side Not Shown) 2
27 M6 Flat Washer (Right Side Not Shown) 2
28 Tie Rod (Right Side Not Shown) 2
28
27
26
Torque to 16 N-m/142 in-lbs.
Hand thread M10 bolts and leave loose
***Note: Pivot Block is symmetrical***