9
ENGLISH
MAINTENANCE
MAINTENANCE SCHEDULE
ACTION FREQUENCY
Unplug the unit. Clean entire frame and shrouds using water and a mild soap or other Matrix approved solution
(cleaning agents should be alcohol and ammonia free).
DAILY
Check step motion and stability to ensure the ClimbMill does not rock or wobble. QUARTERLY
Check all connecting joint areas for tightness of bolt assemblies. QUARTERLY
Ensure that there is little, or no free play at all joint assemblies once bolts have been tightened. Installation of
washer kits may be required if free play does not come out from tightening bolts.
QUARTERLY
Unplug the ClimbMill and remove the access panel. Clean sprockets of old grease and re-apply a lithium-based
grease to sprocket teeth.
QUARTERLY
Unplug the ClimbMill and clean the AUTO STOP SENSORS (located under the bottom step) and IR sensor
windows on Control Zone with a cotton swab, water and a mild soap or other Matrix approved solution
(cleaning agents should be alcohol and ammonia free).
QUARTERLY
PRODUCT SPECIFICATIONS
PERFORMANCE
CONSOLE PREMIUM LED
Max User Weight 182 kg / 400 lbs
Product Weight 187 kg / 412.3 lbs
Shipping Weight 208 kg / 458.6 lbs
Overall Dimensions
(L x W x H)*
182.5 x 102.4 x 219.1 cm /
71.9” x 40.3” x 86.3”
* Ensure a minimum clearance width of 0.6 meters (24”) for access to and passage around MATRIX equipment.
Please note, 0.91 meters (36”) is the ADA recommended clearance width for individuals in wheelchairs.
To Next Page
Loading...
Need help?
General
