4
ENGLISH
UNPACKING
Unpack the equipment where you will be using it. Place the carton
on a level flat surface. It is recommended that you place a protective
covering on your floor. Never open box when it is on its side.
IMPORTANT NOTES
• All video and power outlets must be functional the day of delivery
/ assembly of the product. The client is responsible for any
additional installation charges associated with return visits.
• During each assembly step, ensure that ALL nuts and
bolts are in place and partially threaded.
• Several parts have been pre-lubricated to aid in assembly
and usage. Please do not wipe this o. If you have diculty,
a light application of lithium grease is recommended.
WARNING!
There are several areas during the assembly process that special
attention must be paid. It is very important to follow the assembly
instructions correctly and to make sure all parts are firmly tightened. If
the assembly instructions are not followed correctly, the equipment could
have parts that are not tightened and will seem loose and may cause
irritating noises. To prevent damage to the equipment, the assembly
instructions must be reviewed and corrective actions should be taken.
NEED HELP?
If you have questions or if there are any missing
parts, contact Customer Tech Support.
ASSEMBLY
TOOLS REQUIRED:
F 6mm Allen Wrench
F 5mm Allen Wrench
PARTS INCLUDED:
F 1 Main Frame
F 1 Console Mast
F 1 Console Mast Cover
F 2 Upper Handlebars
F 2 Lower Handlebars
F 2 Bottle Holders
F 1 Sweat Collector Tray
F 1 Control Zone
F 1 Power Cord
F 1 Hardware Kit
Console sold separately
To Next Page
Loading...
Need help?
General
