Matrix PETROL 4-IN-1 - Installation and Commissioning

16
4. Installation and commissioning
Note:
Before attaching cutting accessories, first remove the transport protection.
When replacing the spools of thread or knife, do not remove the cutting guard (15).
To avoid the risk of unintentional starting, pull out the spark plug connector.
4.1 Brush cutter-Grass trimmer-Pruner-Hedge trimmer-Combination Device: Handle
Assembly 1 Assembly
a
b
21
c
1a
Secure the handle
(1a) to the drive
unit with the 4
xing screws (a)
and the nuts (b) of
the drive-unit (c)
21
1a
4.2 Brush cutter-Grass trimmer-Pruner-Hedge trimmer-Combination Device: Grass trimmer
RISK OF INJURY
CAUTION: Always wear protective gloves when working on and around cutting tools.
Assembly 2 Assembly
14
15
To use the device as a grass trimmer, the
cutting guard (15) and spools of thread (14)
must be mounted.
15
14