Matrix SATATYA PARAM NVR Series User Manual

Matrix SATATYA PARAM NVR Quick Start 12
SATATYA PARAM NVR will be provided with the following Services and Clients (in XCTS variants):
• Management Server
• License Server
• Recording Server
• Notification Server
• Admin Client
•Smart Client
The following Devices, Services and Clients are supported by SATATYA PARAM NVR and can be
installed/connected as per your requirement:
• SAMAS IVA Server
• Multi Monitor Client
• NVRs, DVRs and IP Cameras
•COSEC CENTRA Server
•COSEC PANEL200
• ARC IO 800 Controller
•Smart Client
•Media Player
• Third Party / Business Application for Integration
Further the Installation instructions have been divided into two sections:
• Hardware Installations, refer “Hardware Installation of SATATYA PARAM NVR”
• Software Installations, refer “Software Installation of SATATYA PARAM NVR”
Recommendations
• Make sure you configure recording of maximum 64 channels in each HDD. If multiple HDD’s
are installed make sure you distribute the recordings. For example, if you have installed 8
HDD’s and 128 camera’s, then in each HDD recording of 16 camera’s can be configured.
• Make sure the throughput is 512 mbps down-link and 512 mbps up-link.
• Make sure both the Power Supplies are connected. If one Power Supply is connected it will
result in degraded performance.

Matrix SATATYA PARAM NVR Series Specifications

General

Brand	Matrix
Model	SATATYA PARAM NVR Series
Category	DVR
Language	English