Matrix SATATYA PARAM NVR Series User Manual

15 Matrix SATATYA PARAM NVR Quick Start
Any electrostatic energy coming in contact with the hard disk or the internal parts of the
NVR can cause permanent damage to them. Before you begin the installation of the
hard disk, make sure your workstation is static-free. Always wear an electrostatic
discharge preventive wrist strap or belt and use a grounding mat.
• Insert the hard drive on the tray.
• Use four screws to fix the HDD.
• Slide the tray into the HDD bay.
• Push the lever to latch HDD tray.
Maximum torque to be applied for tightening the screws is 3 kgf.cm. Applying more
than specified torque will cause a damage to the HDD and the emboss.
Rack Mounting
There are two rails — inner rail and outer rail. You can install the rails into the racks using the
round holes or square holes.
Follow the instructions given below:

Matrix SATATYA PARAM NVR Series Specifications

General

Brand	Matrix
Model	SATATYA PARAM NVR Series
Category	DVR
Language	English