Matrix SATATYA PARAM NVR Series - Page 59

55 Matrix SATATYA PARAM NVR Quick Start
Example:
If an organization has multiple branches. The main branch is located at the central location,
Gujarat while the other branch is located in Mumbai.
Also, the MS and RS1 has been installed in the same network at the Central location (Gujarat),
while RS2 has been installed at remote location (Mumbai).
Now refer the following architecture for the network configuration setup. It also explains that
how the connection is established between RS1 & MS and RS2 & MS.
Recording Server
Live Stream of the cameras can be accessed using clients such as Admin Client, Smart Client and
IVA Server. For this, clients has to communicate with the Recording Server (RS).
Also, it is not necessary that both client and RS are located in the same network, they may be
located in two different networks. So to serve both the scenarios, SAMAS allows to configure
preferred networks, where user can add private as well as public networks of RS.
Management Server
IP : 192.168.102.211
Management Server
Manager
Non SSL
Recording Server Listening
Port: 8090
SSL
Recording Server Listening
Port: 7090
ISP 1
IP: 192.111.10.11
ISP1 Port Forwarding
192.111.10.11 – 192.168.102.211
1025 – 8090
7090 - 7090
MS Confi gurati ons in RS 2
Manager:
Preferred Network1
IP Address: 192.111.10.11
Port:1025
Preferred Network2
IP Address: 192.111.10.12
Por t: 1026
Preferred Network3
IP Address:
Port:
ISP 2
IP: 192.111.10.12
ISP2 Port Forward ing
192.111.10.12 – 192.168.102.211
1026 – 8090
7090 - 7090
Intern et
Central Lo cation - Gujarat
Remote Locati on - Mumbai
MS Configurati ons in RS 1
Ma nager:
Preferred Network1
IP Address: 192.168.102.211
Port: 8090
Preferred Network2
IP A ddress :
Port:
Preferred Network3
IP A ddress :
Port:
MS with 2 ISP connections (RS)
Recording Server 2
IP: 172.16.2.20
Recording Server 1
IP: 192.168.102.222