Matrix SPARSH VP248 User Manual

Call Budget
To assign Call Budget Amount:
Ÿ Press DSS Key assigned to Assign
Call Budget.
Ÿ Enter Room/Phone Number.
Ÿ Enter Call Budget Amount. (Amount
is in 6 digits; use leading zeros )
Ÿ Confirmation Tone. Go On-Hook.
Or
Ÿ Dial 1072-004-Room/Phone Number-
Call Budget Amount (Amount is in 6
digits; use leading zeros)
Ÿ Confirmation Tone. Go On-Hook.
Call Block
To Block Room-to-Room Calls:
Ÿ Press DSS Key assigned to Call
Block. (LED glows Red)
Ÿ Confirmation Tone. Go On-Hook.
To Allow Room-to-Room Calls:
Ÿ Press DSS Key assigned to Call
Block again. (LED turns Off)
Ÿ Confirmation Tone. Go On-Hook.
Or
Ÿ Dial 1072-045-1
Ÿ Confirmation Tone. Go On-Hook.
Ÿ Dial 1072-045-0
Ÿ Confirmation Tone. Go On-Hook.
Or
Alarm Status Report
To print Alarm Status Report:
Ÿ Press DSS Key assigned to Print
Alarm Status Report.
Or
Ÿ Dial 1072-913
Alarms (Cont.)
Or
Voice Guided Alarm:
Ÿ Press DSS Key assigned to Remote
Voice Guided Alarm.
Ÿ Follow the Voice Mail System prompts
to set Alarm.
To cancel Voice Guided Alarm:
Ÿ Repeat the above steps.
Ÿ Dial 1072-034-Follow Voice Mail
System Prompts.
Ÿ Dial 1072-034-Follow Voice Mail
System Prompts.
Voice Guided Alarm can be set only if a Voice Mail System is installed in the System.
Or
Call Privilege
To set Dynamic Lock:
Ÿ Press DSS Key assigned to Dynamic
Lock Remote.
Ÿ Enter Room/Phone Number.
Ÿ Select the option ‘Change Toll Control
Level’.
Ÿ Press Key.
Ÿ Scroll to select a Toll Control Level.
Ÿ Press Key.
Ÿ Confirmation Tone. Go On-Hook.
To set Auto Dynamic Lock:
Ÿ Press DSS Key assigned to Dynamic
Lock.
Ÿ Enter Room/Phone Number.
Ÿ Scroll to select ‘Change Lock Timer’.
Ÿ Press Key.
Ÿ Set Lock timer for: 01-99 Minutes.
Ÿ Confirmation Tone. Go On-Hook.
To set Manual Dynamic Lock:
Ÿ Press DSS Key assigned to Dynamic
Lock.
Ÿ Enter Room/Phone Number.
Scroll to select ‘Change Lock Timer’.
Ÿ Press Key.
Ÿ Enter User Password.
Ÿ Set Lock Timer for: 00
Ÿ Confirmation Tone. Go On-Hook.
Ÿ Dial 1072-002-Room/Phone Number-
1-Scroll to select a Toll Control Level.
Ÿ Press Key.
Ÿ Confirmation Tone. Go On-Hook.
Ÿ Dial 1072-002-Room/Phone Number-
2-Minutes (01-99).
Ÿ Confirmation Tone. Go On-Hook.
Ÿ Dial 1072-002-Room/Phone Number-
2-00
Ÿ Confirmation Tone. Go On-Hook.
Or
Check-In
Ÿ Press DSS Key assigned for ‘Check-
In’.
Ÿ Scroll to select desired Check-In
Profile.
Ÿ Enter Room/Phone Number to Check-
In.
Ÿ Enter Guest Title.
Ÿ Enter Guest Name.
Ÿ Confirmation Tone. Go On-Hook.
Or
Ÿ Dial 1072-901-Check In Profile-
Room/Phone Number-Guest Title-
Guest Name.
Check In Profile:
1 - Single
2 - Family
3 - Budget
Ÿ Confirmation Tone. Go On-Hook.
Or
Or

Matrix SPARSH VP248 Specifications

General

Brand	Matrix
Model	SPARSH VP248
Category	Telephone System
Language	English