Matsui MCD7W19E - Error Codes

48
Error Possible Fault What to do
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
The water tank is full.
Empty the water tank.
If your machine persists to
indicate fault, turn off your
machine, unplug it and
contact the nearest authorised
service immediately.
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
Compressor connector is
disconnected.
Turn off your machine,
unplug it and contact the
nearest authorised service
immediately.
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
Compressor NTC
connector is
disconnected
Turn off your machine,
unplug it and contact the
nearest authorised service
immediately.
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
Drying
Cooling
3h.
6h.
9h.
End
Power fluctuation.
Turn the machine off and on
at the mains.
If your machine persists to
indicate fault, turn off your
machine, unplug it and
contact the nearest authorised
service immediately.
Error Codes
Your tumble dryer has some built-in error codes. If it stops working properly the table below
shows you which lights will be illuminated and what the possible fault is.
Matsui Condenser Tumble Dryer MCD7W19E Manual.indb 48 14/02/2019 16:57